SS410 Steel Billets
Type 410 martensitic stainless steel. A hardenable stainless steel with moderate corrosion resistance and good strength.
SS410 chemical composition
| C | 0.15 max % |
|---|---|
| Si | 1.00 max % |
| Mn | 1.00 max % |
| Cr | 11.5 – 13.5 % |
| P | 0.040 max % |
| S | 0.030 max % |
Indicative ranges from the common grade standard. The final analysis is as per the order and the heat test certificate.
Equivalent grades
X12Cr13 / 1.4006 · 410S21 approx.
Equivalents are approximate. See the grade equivalents guide.
SS410 billets and blooms
410 billets and blooms supply valve stems, pump shafts and turbine parts. The related 409 and 430 ferritic grades are also available on request.
Kesari Alloys supplies SS410 as continuous cast billets and blooms from 100 × 100 to 250 × 250 mm and 200 mm round, in lengths up to 12 metres. See the billet size chart for weight per metre.
Heat treatment: Hardened and tempered. Strength depends on tempering temperature.
Typical uses of SS410
- Valve trim and stems
- Pump shafts
- Turbine parts
- Fasteners and cutlery-grade parts
Industries: the valve industry, flange forging.
Related grades
SS410 questions
What is SS410 steel used for?
SS410 is used for valve trim and stems, pump shafts, turbine parts, fasteners and cutlery-grade parts.
What is the equivalent of SS410?
X12Cr13 / 1.4006 · 410S21 approx.. Equivalents are approximate, so check the limits in your specification.
Does Kesari Alloys supply SS410 billets?
Yes. SS410 is available as continuous cast billets and blooms (100 to 250 mm and 200 mm round, up to 12 m). Send the size, length, quantity and standard to info@ksl.in for a quotation.