100x100 Steel Billets
100x100 steel billets are the smallest square section Kesari Alloys casts. They are the usual starting stock for small forgings and for rolling into small bars and sections.
100 × 100 mm specification
| Size | 100 × 100 mm square |
|---|---|
| Section type | Billet, continuous cast |
| Weight per metre | about 75 kg (indicative, ±3%) |
| 6 m length | about 450 kg |
| 12 m length | about 900 kg |
| Lengths | Up to 12 m, or cut to length |
| Grades | Carbon, alloy and stainless steel |
| Supply | As cast; heat treatment and grinding on request |
100x100 Steel Billets: supply
We make 100 mm square steel billets in carbon, alloy and stainless steel grades.
As a 100x100 billet supplier India forging shops and re-rolling mills can rely on, we supply cut lengths or lengths up to 12 metres.
Choose 100 mm when the finished forging is small and a heavier section would waste steel in cut-off and scale loss.
Typical forged and rolled parts
- Small forged shafts, pins and studs
- Fastener and bolt blanks
- Re-rolling into small bars and sections
- Small gear blanks and couplings
Popular grades in 100 × 100 mm
EN8
General-purpose medium carbon steel with a good balance of strength and machinability. It responds to quenching and tempering in small and medium sections.
EN19
A widely used chrome-moly steel with good hardenability, toughness and fatigue strength in the quenched and tempered condition.
SAE 8620
A low carbon Ni-Cr-Mo steel that carburises to a hard surface over a tough core.
SAE 1045 / C45
A common medium carbon steel with good strength and machinability. Often used in the normalised or quenched and tempered condition.
Other sizes
100 × 100 mm questions
How much does a 100 × 100 mm billet weigh?
About 75 kg per metre, so about 450 kg for a 6 m length and 900 kg for 12 m. Weights are indicative, within about ±3%.
What grades are available in 100 × 100 mm?
All grades of carbon, alloy and stainless steel, including EN8, EN19, EN24, SAE 4140, SAE 4340, SAE 8620 and 20MnCr5. Send your grade and standard with the enquiry.
What length can I order?
Lengths up to 12 metres, or cut to length. Billets are suitable for sawing or shearing in the cold condition.